Where is crcdisk.sys

Now, for the patche, do you remember which one is it? I just run Windows Update, and it give me 3 optional items:. Hello cvan11, I'm not sure about the patch that is mentioned, but if you can download and install the Intel - Storage Sata Raid Controller driver, I would suggest doing this. It has been my experience that some times the Microsoft provided Realtek High Def Audio drivers will often fail and cause your audio device to stop working.

I always go to the Realtek site and locate the Realtek drivers for my audio device. These are usually newer and more stable than the Microsoft downloads of the Realtek drivers. I checked the Model number of your system on the HP web site and HP was unable to locate the model number you listed but did locate a Link to a similiar model. This may be your model. You can try installing the memory module and see if the system will accept it without any issues.

It would be a tossup as to whether it would or would not. HP systems are a little picky with respect to the memory these systems will support. Most of the PCIe 2. After inserting the VC and turning on the PC with the monitor connected thru the VC, the windows would load just until the green loading bar appeared but the screen turned black right after.

Can you think of any reason why? And I heard that PCI-e 1. Do you think this is the reason of the unsuccessful booting? Hello cvan11, I'm not sure why the system acts acted as you describe. I checked the specifications for your system and is shows it supports. I also checked the power supply minimum requirements for the Radeon HD video card and the minimum power supply is a watt power supply. Your computer was shipped with a watt power supply, so you would be right under the minimum, but I believe it should work.

I would make sure I had the latest drivers for your video card. These can be found Here , at the AMD web site.. On most HP systems that ship with an onboard video device, and a discrete video card is added, the onboard video device is automatically disabled. I looked at the instructions to add a video card to your system, that can be found Here , and it has some information about selecting the video device in the BIOS. This may not apply to your system. You may want to enter the BIOS and see if your system has the feature to select the video device.

My original VC Nvidia GT was fried after I physically switched the monitor orientation during Windows operation, so currently I'm using the on board video intel I think. I am trying to troubleshoot this before I have to return the VC. Thanks for your assistance. However, we never got there as the black screen was all we got. Didn't find what you were looking for?

Ask the community. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. InterWorks will never disclose or sell any personal data except where required to do so by law.

Finally, I understand that future communications related topics and events may be sent from InterWorks, but I can opt-out at any time. This field is for validation purposes and should be left unchanged. Mail Email. Billing Address is different than Shipping Address. Yes No. Drop files here or Select files. Please provide a resale certificate for each applicable state.

Seller's permit does not meet requirement for deferring sales tax. Please provide tax exempt status document. I'll post here once again with results once it arrives here in a few days. I cross my fingers. The computer hangs during startup until after latest upgrade of Windows 7.

My new Dell has a little less than 3 months and so far has worked like a dream. It runs Windows 7. The latest Windows updates, which there were 3 were installed as I stopped last night. The pc reacts more than anything, so finally, I manually turned off and restarted. The system returns to a previous Restore Point. Later in the day, I turned off the pc how he downloaded 3 updates probably the same ones again and the same problem occurred when restarting later.

The pc is running McAfee SecurityCenter, which has been pre-installed again. Because this update was 'critical', he went ahead and downloaded itself last night while I was asleep. I woke up this morning to a glorious flashing cursor whenever I try to start. My computer still runs beautifully, now it does not even start.

Thank God for this update, otherwise I might be able to get for the photoshops I was working on that. I press the power on switch, HP light lights, then a flash of light yellow for the access to the disk, and then off as if I had pressed the on-off switch.

No display on screen. Power switch is turned off unless I unplug the power supply cord until the green light on the back of the unit turns off.

Only change I made before, was that I plugged the power cord directly to wall outlet instead of a surge protector. Maybe a power surge corrupted a file? The computer is running daily since without incident, then, of course, that I don't remember what I did with my Wincows XP Recovery disk. Is it possible that I can make a recovery CD, or do I have to take my computer in a store? I suggest that you wake the computer to the local computer store and check if all cables are connected properly and the computer power supply is correct.

Visit our Microsoft answers feedback Forum and let us know what you think. You should try running a Chkdsk on your computer to check if there are bad sectors on the hard disk.

It is recommended that you back up all data and files before performing this. Vista stops during boot. During startup, Vista try to load, but then stops. I tried F8 but I try all options will also shut down the computer. When I could finally get it and try to fix your computer, he analyzes and the told me it cannot be resolved. Is there a diagnosis online which allows to fix this situation? Other options in addition to a full system restore?

Try a restore of the system once, to choose a Restore Point prior to your problem When I click on a link in Outlook Express, Firefox takes more than a minute to open the page.

I have 2 other computers running the same operating system XP and the same versions of Firefox and Outlook Express that do not have this problem. Drag and drop in a listbar. Kind regards Julien. Back up and Restore Center - unable to save external hard drive Iomega - get code error 0 x HelloI used my external hard drive Iomega once, about 8 months ago to save the files on m y HP laptop.

I tried these last days to support again I know, I should have backed up regularly! Volume in blaackberry slider. Hi all I need to create the volume slider in my application. My basic requirement is to get the noise level. Please someone tell me how to create the volume slider in blackberry? Thanks in advance. Hello I'm trying to transfer a qt application for blackberry 10 for this I'll put the qt creator according to this document I hope this helps.

Good luck! I just installed Vista SP2. Rebooted and everything went well. What could be? How I can fix? Thank you. There is information below data recovery. And Startup Repair Info, too. Data recovery: 1. Click on the icons of hard drive to open and to understand which drive is which. You can do a system restart tool, system, etc it restore. It is NOT a disc of resettlement. And the bit is what normally comes on a computer, unless bit.

Mike You use a floppy disk? If you do not, disable it in the BIOS. I followed the MS forums, but also here, but never found a solution. Has anyone installed Vista Beta on a Tecra A4 again?

If so, what is the secret? Any help appreciated Salamat Just downloaded and installed build and still no change